Preview. This site shows draft content that a qualified electrician has not reviewed yet. Do not rely on it.

RCD keeps tripping

Act soon Get it checked this week

An RCD that keeps switching off is detecting a fault. Here is what it means, what is safe to check and when to call an electrician.

What you notice

  • The RCD switch in your consumer unit drops and cuts power to several circuits
  • It trips at random, or when a certain appliance is switched on
  • It will not stay on when you reset it

Common causes

  • A faulty appliance, often one with a heating element such as a kettle, oven or washing machine
  • Moisture in an outdoor socket, light fitting or bathroom circuit
  • Damaged cable insulation
  • An ageing RCD that has become over-sensitive

Checks that are safe to do yourself

These checks do not involve opening anything or touching wiring.

  • Unplug every appliance on the affected circuits, then reset the RCD
  • If it stays on, plug appliances back in one at a time. The one that trips it is the likely cause. Stop using that appliance
  • Check whether it trips in wet weather, which points to an outdoor circuit

Stop and call an electrician if

  • It trips with nothing plugged in
  • It trips again the moment you reset it
  • You smell burning or see scorch marks
  • The consumer unit feels warm or makes a buzzing noise
  • Anyone has received a shock

Never do this

  • Do not hold, tape or wedge the switch in the on position
  • Do not remove the cover of the consumer unit
  • Do not keep resetting it again and again

Not yet reviewed by a qualified electrician.

How we can help

Want us to take a look?

Tell us what you have noticed and we will get back to you.

Not set yet: phone number, WhatsApp number, response time, area covered. Add them in src/config/site.ts. Until then the quote form is the only contact route shown.